Keeping hardware or laptop with
full protection may result in some fault or damaged screen. When the laptop
screen gets cracked, then you are not able to view anything, and you get tense.
A cracked screen makes your laptop useless.
We are offering DIY tips to
repair the laptop screen.
Taking Off the Old Laptop Screen
Remove all power sources of the
laptop, including battery. Ensure that no power is supplied to the laptop. Keep
the battery at a safe place.
Remove the rubber screw covers
You will find some rubber screw
cover near to the screen for protecting the screw. You can remove the screw
with the help of a screwdriver, after taking out the screw place the cover and
screw in a secured plastic bag.
Detach the bezel from the screen
Spot your fingers at the base
focal point of the laptop screen. At that point, delicately slide your fingers
between the bezel and the screen. Pull the bezel with your fingers. It should
snap free. If it doesn't, have a go at pulling it delicately in various ways
until it comes free. Work your fingers around the bezel until it withdraws from
the screen.
If the bezel doesn't pop or slide
off with a touch of pulling, you may have missed a bezel screw. Check the
screen to confirm you expelled all the bezel screws so the bezel can slide off.
Disconnect the cable that is
connected to screen
Take out the cable that is
connected with the laptop screen, which is a long link taped to the rear of the
screen. Strip off the tape and unplug the connector from the rear of the
screen. You will similarly need to expel the power cable on the rear of the
screen.
Depending upon your laptop model,
you may likewise need to evacuate screws at the edge of the screen that
connects it to the metal casing. Utilize a screwdriver to do this. Keep the
fastens a protected spot.
Remove the screen of the laptop
After removing the bezel and
cable now, you can easily remove the damaged screen of the laptop. Carefully
remove the screen of your laptop by tilting it. Ensure that you do not get damaged
with the damaged screen.
Insert New screen
Depending upon the type and model
of your laptop you should take the new screen. Visit a reliable store for
purchasing the laptop screen. Once you get the suitable screen place it in the
metal frame, ensure that it rightly fits in the metal frame. And then process
the reverse that you have followed for opening the damaged screen.
Add battery and power source
After checking that screen is
placed properly, you have to apply a battery and another power source to the
laptop and start your laptop. Now you are ready to operate your laptop.
If you find it difficult then
don’t worry Chatswood Computer is always available to help you. We have experts
that perfectly repair the damaged laptop screen. To know more about our Laptop Repair Chatswood service you can contact us on 02 9417 0119. Our customer support is
always available to you.
No comments:
Post a Comment